Step 1: Remove Old Showerhead
Twist your old showerhead counterclockwise to remove it.
Step 2: Attach the Second Shower Head
Screw the showerhead onto the pipe clockwise until snug. * Hand-tightening is enough—no tape or tools needed in most cases.
![]()
Step 3: Secure & Enjoy
Make sure all connections are tight (hand-tight is enough).
Turn on the water to check for any leaks.
Leakage Tips:
- Use plumber’s tape (1–2 wraps) only if leaks occur.
- Insert the rubber washer into the connection.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.